Quick Placement — Steel Fixer in Peterborough PE3
Rebar Bending & Cage Making Specialist
Available for New Build Housing Contract · Call Quick Placement

🔩 Rebar Cutting & Bending

Manual and machine bending of T8–T40 bar. Accurate cutting to schedule dimensions, with full shape codes to BS 8666 including standard hooks, laps, and cranks.

🏗️ Cage Making

Fabrication of column, beam, pile cap and retaining wall cages. Pre-fabricated cages tied off-site and lifted into position, or assembled in-situ — both methods covered.

📐 Bar Scheduling

Reading and cross-referencing engineer-issued bar bending schedules and RC drawings. Checking cover spacers, laps, and splice lengths against specification before pour.

🧱 Foundations & Ground Beams

Strip, pad, and raft foundation reinforcement for residential plots. Ground beam cages including links, links and U-bars, fitted to excavation tolerances.

🏠 Suspended Slabs & Stairs

Top and bottom mat reinforcement for suspended slabs, landings, and precast stair connections. Correct placement of flying ends, tying wire and chairs to spec.

✅ Pre-Pour Inspection Readiness

Understanding of pre-pour checklists, cover verification, tie density, and tolerance compliance — ensuring the steel package passes structural engineer inspection first time.

The Challenge: A Cambridgeshire principal contractor was six plots behind programme on a 48-unit scheme. The existing steel fixing sub-contractor had demobilised following a commercial dispute, leaving no rebar resource on site. The structural engineer had a pour inspection booked for ten days' time — covering twelve ground beam sets and four pile caps.

Quick Placement's Response: Quick Placement received the call at 7:30 am and had confirmed six CSCS-carded Steel Fixers within four hours. All six were on site by 7:00 am the following morning, having collected drawings and a bar schedule from the site office the same evening.

The Outcome: All twelve ground beam cages and four pile cap sets were completed and passed structural inspection with zero remedial notes — two days ahead of the pour date. The contractor subsequently engaged Quick Placement on a rolling 14-week supply agreement covering the full Bretton development.

"We had ten days to save a pour. Quick Placement put six experienced fixers on site by the next morning. Every cage passed inspection first time. They've been our first call for steel ever since."

— Site Manager, Residential Developer, Peterborough PE3

Call or Book Online

Phone 020 3740 0201 or use the Book Staff form. Describe your scope, programme, and site location.

Candidate Matching

Your dedicated construction recruiter matches CSCS-carded Steel Fixers from the Peterborough and East Midlands pool to your exact scope requirements.

Compliance Check

Right-to-work documents, CSCS card validity, and references are verified before confirmation. You receive a compliance dossier for your site files.

Site Mobilisation

Your fixer arrives on site with drawing-reading capability, PPE, and all tools. Same-day and next-day mobilisation available across PE3.

The Challenge: A civils sub-contractor won a fast-track package for a new business park incorporating 1,400 m² of reinforced concrete slab, perimeter retaining walls, and two large pump-house chambers. The programme allowed four weeks for all ground slab reinforcement, with no room for resource gaps.

Quick Placement's Response: Quick Placement's construction division supplied a senior fixing foreman and two experienced operatives — all familiar with civil slab reinforcement using A393 mesh and T16 bar. The team were briefed by the site engineer on day one and worked without supervision throughout.

The Outcome: Ground slab reinforcement was completed in 17 working days against a programme of 20 days, allowing the concrete contractor to pull the pour forward and claw back time against the wider programme. The client extended the engagement to cover the pump house chambers, resulting in an eight-week total relationship with Quick Placement.

⚡ Speed

Same-day and next-day deployment across PE3, PE4, PE6, and PE7. Emergency cover available for pour days and structural inspection windows.

🛡️ Compliance

All workers are right-to-work verified, CSCS-carded, and carry current public liability awareness. Compliance documentation supplied to your site office.

💼 Experience

Every Steel Fixer in our Peterborough pool has verifiable residential or civil contract experience. We do not send general labourers to fixing roles.

📊 Transparency

Clear, agreed hourly or gang rates. Weekly invoicing. No hidden fees, no surprise margin increases mid-contract. What you agree is what you pay.

🔄 Flexibility

Single-day cover for emergency pours to rolling 14-week contracts. Scale the gang up or down as your programme demands without penalty.

🏗️ Sector Knowledge

Our construction recruiters understand bar schedules, BS 8666, pour sequences, and CSCS categories — you get genuine expertise, not a generic temp desk.

"Called Quick Placement at 5pm on a Thursday for fixers needed Friday. By 6am Friday two experienced Steel Fixers arrived on site with their own gear and hit the ground running. The bar schedule was read without prompting. Exceptional service."

D. Hartley — Site Manager, Peterborough PE3 Housing Developer

"We've tried three agencies for steel fixing in Cambridgeshire. Quick Placement are the only ones who actually check the CSCS cards and ask about cage making experience before sending someone. Made all the difference on our inspections."

S. Okonkwo — Contracts Manager, Civil Sub-Contractor, PE1 / PE3

"Quick Placement supplied a gang of four for our raft foundation package. Foreman was excellent, managed the junior fixers well, and the work was clean and inspectable. We've booked them for the next phase already."

A. Ramchandani — QS, Regional Housebuilder, East Midlands

"I registered with Quick Placement as a Steel Fixer looking for contract work in Peterborough. Within two days I had my first placement and it turned into a 10-week contract. The team understood the trade and spoke my language. Highly recommended."

M. Oluwafemi — Steel Fixer, PE3 / Peterborough Area

How quickly can Quick Placement supply a Steel Fixer to a site in Peterborough PE3?

Quick Placement can confirm a CSCS-carded Steel Fixer for a Peterborough PE3 site in as little as four hours from the initial call, with same-day or next-morning mobilisation for standard fixing roles. For larger gangs or specialist cage-making requirements, confirmation is typically within 24 hours. Our construction recruiter team operates 24/7, so emergency cover for pour-day fixing is available even when the request comes in outside office hours. Call 020 3740 0201 at any time.

Do all Steel Fixers supplied by Quick Placement hold a valid CSCS card?

Yes — 100% of Steel Fixers placed by Quick Placement hold a current and valid CSCS card. For a reinforcement fixer role, the relevant cards are the Blue Skilled Worker card (Level 2 NVQ in Reinforced Concrete Work) and the Gold Experienced Worker card for fixers with higher-level qualifications or supervisory experience. Quick Placement verifies card validity and category during pre-screening, and supplies a copy to your site office as part of the compliance dossier. We do not place workers on construction sites without the correct, in-date card for the role.

Can Quick Placement supply a full rebar gang for a Peterborough housing contract?

Yes. Quick Placement's construction staffing division can supply complete rebar gangs for residential and civils contracts in Peterborough — typically comprising a fixing foreman, experienced Steel Fixers, and junior fixers, scaled to your programme requirements. Gang rates are agreed upfront and fixed for the duration of the contract, with weekly invoicing and no hidden charges. Gangs of two to twelve operatives are regularly placed on new build housing schemes across PE3, PE4, and PE6. Contact us via our book staff form to discuss a gang supply quote.

What is the difference between rebar bending and cage making, and can Quick Placement fixers do both?

Rebar bending refers to the cutting and shaping of individual reinforcement bars to the dimensions and shape codes specified on a BS 8666 bar bending schedule — using manual benders, electric bending machines, or CNC bar-processors. Cage making is the assembly and tying of individual bent bars into three-dimensional reinforcement cages (columns, beams, pile caps, retaining walls) using binding wire, typically to a structural drawing or engineer's specification. The Steel Fixers supplied by Quick Placement are trained and experienced in both disciplines, and can move between bending, placing, and tying as the programme demands.

I am a Steel Fixer looking for work in Peterborough — how do I register with Quick Placement?

If you are a Steel Fixer based in or near Peterborough and looking for contract or temporary work, browse current construction vacancies on our jobs board or call 020 3740 0201 to register directly with our construction labour desk. Have your CSCS card details, relevant experience, and right-to-work documents ready. Registration takes under 15 minutes, and active fixers in the Peterborough PE3 area are typically placed within 24–72 hours of completing our compliance checks. We pay on a weekly basis, above the National Living Wage, with transparent rates agreed before your first shift. You can also contact us online here.